Protecting Your iPad: Scratch-Free Cleaning Method

If you have had your iPad for a while, you have probably noticed it doesn’t stay clean and shiny like when it was new. Fingerprints, dust, and greasy marks can make it look messy and shabby at times.

The good news is that cleaning your iPad is not difficult at all. With some simple ways, you can have a sparkling screen like before. Today, we will learn what to do and what not to do when cleaning your iPad.

Most marks on your iPad screen can be wiped off using a dry, soft cloth. For tougher and harder spots, you can use a bit of 70% isopropyl alcohol.

The below-mentioned details will help you to know the safest ways to clean your iPad screen without causing any damage or scratches on it.

Dos and Don’ts for iPad Screen Cleaning

When cleaning your iPad’s screen, it is necessary to be gentle and cautious as your device is delicate.

Here are the Don’ts that you must remember:

  • Keep your iPad away from any type of aerosol sprays, bleaches, or abrasive cleaners. They might harm your iPad’s screen.
  • Don’t spray any type of cleaning solution directly onto the iPad. Rather, apply the solution on a soft piece of cloth first.
  • Don’t leave your device plugged in or turned on during the cleaning process.
  • Stop yourself from using rough materials like paper towels to clean the screen.

Here are the Do’s that you must remember:

  • Power off your iPad and disconnect any cables before you start with the cleaning.
  • Use a microfiber cloth and wipe the screen gently in circular motions.
  • For tough dirt or stains, lightly dampen the piece of cloth with 70% isopropyl alcohol.
  • Being cautious and following the above steps will help keep your iPad clean without causing any damage or scratches on the screen.

Cleaning your iPad Screen in 3 Easy Steps

Cleaning your iPad screen is easy. Just follow a few steps to keep it clean and scratch-free.

There are three simple steps you should follow to clean your iPad properly:

Turn Off Your iPad

At the beginning, switch off your iPad completely. No cables should be connected to the device and to the power.

If your iPad has Face ID, you need to press and hold the Power and Volume up buttons. While doing it, a slider would appear. Now, swipe the slider to turn off the iPad.

For iPads with a Home button, start by pressing the Power button. Hold it for a bit until a slider shows up on the screen. Then, just swipe the slider to turn off the iPad.

Clean the Screen with a Dry Cloth

Next, you need a soft piece of cloth. It could be a lens or microfiber cloth. Use the cloth gently in circular motions to wipe the screen.

Since the iPad’s screen repels oil, a dry cloth is enough to remove smudges and fingerprints.

For Stubborn and Tough Dirt

If there is some tough dirt on the screen, dampen a lint-free cloth with 70% isopropyl alcohol.

Gently wipe the hard parts of your iPad, like the screen and the outer parts. Be careful to avoid letting any moisture get into the speaker holes or charging port.

Remember, it is better not to use regular cleaning products on your iPad, even the ones that are available in the market, mentioning them to be the special ones for screens.

Apple clearly suggests avoiding these cleaning agents as they might damage your iPad. If you still wish to use any one of them, spray it onto the cloth.

Do not use it directly on the screen. Direct spraying can cause water damage, and you might need Apple’s help to fix it.

Screen Maintenance Tips

Taking care of your iPad’s screen is important. Clean it only when needed. Clean it, especially if smudges block what you see.

If your iPad gets dirty, clean it immediately. But don’t rub it too hard because that can make the screen coating weak.

Avoid rough things near your iPad. Like rough cloth, dirt, or sand, they can scratch the screen and remove the coating.

Keep liquids away from the device. Don’t let any water or liquid get into the device. Also, don’t use strong chemicals like window cleaner or bleach near it. They can harm your iPad.

Remember, gentle cleaning and keeping away rough stuff and liquids can help your iPad’s screen stay in good shape.

Taking Care of Your Screen

Taking care of your iPad screen is important to keep it safe and working well for a long time.

Cleaning the Screen

  • Only clean your screen when it’s really needed.
  • If there are smudges making it hard to see, wipe them off. If something bad touches your iPad, clean it immediately.
  • The special coating on the screen can get weaker if you rub it a lot. So, try not to rub it too hard.

Avoid Scratchy Stuff

Don’t let rough things touch your iPad, like rough clothes, dirt, or sand. They can scratch the screen and make the special coating come off faster.

No Liquids Near Your iPad

  • Keep liquids away from your iPad. Don’t use strong cleaning stuff on or near it.
  • Things like solvents, sprays, or strong cleaners should stay away from your iPad.

What if Your iPad Gets Wet?

  • If your iPad gets wet accidentally, immediately unplug the device and turn it off. Then, carefully and gently dry the device with a soft towel and let it dry completely.
  • Do not use heat or compressed air to dry it. They can harm your iPad inside.
  • If you think your iPad has got wet, put it in a sealed bag with some special gel packs for 72 hours. Remember that do not use rice. It might get stuck inside.

By remembering these simple steps and utilizing them when needed, you can make sure your iPad stays clean and safe from damage.

To Conclude

Maintaining a clean iPad screen is simple, with gentle care and the right methods. Remember the dos and don’ts, follow the steps, and keep liquids away for a sparkling, scratch-free screen.

Leave a Comment